1986 Chevy Monte Carlo Drag Car with PA Title. (Fiberglass Deck lid, Harwood hood, 1 piece front clip (SS style) and fiberglass rear bumper (1987 style with 1987 Tail lights). Everything else factory steel. All lexan margard windows. S&W Ladder bar back half, stock frame/front suspension. 8.50 rollcage just NHRA recertified on 04/13/2024. 589 BBC, powerglide, Ford 9” rear, 4.29 pro gears. Best pass 8.69 @ 157MPH (1305 DA). Last Pass 09/18/2021 8.83 @ 155MPH (3031 DA), 3325lbs with driver. Ran Brackets and Super Street 10.90 @ 146MPH.
Engine: Merlin Block, Manley 4.500 forged crankshaft, Manley 6.700 H-beam rods, Brodix 1802 Big Duke Heads (Titanium Intake and exhaust valves), T&D 1.70 shaft rockers, JE 4.565 bore pistons, Morel lifters, Jesel Belt drive, Ron’s Terminator, Billet 0 ½ pump, surge tank and Primer plus system, MSD Billet Distributor, Fast Crank trigger, (Moroso Billet oil pump, Vacuum Pump, oil accumulator), ATI super damper. Custom Stepped headers 2 ¼ to 2 3/8. 4” X-Pipe exhaust thru dynatech mufflers. Engine has approximately 200 runs (mostly 1000’) since freshened (which included the rotating assembly)
Transmission: TSI one piece SFI case (just recertified 12/2023), TSI 1.80 planetary with 4340 output shaft, TSR pro tree transbrake Valve Body, TSR Vasco Input shaft, JW ultra pump, 8 Clutch Drum, Meziere heat exchanger pan (Hooked to coolant system). In car pump system to cycle transmission fluid thru the converter and transmission cooler (Car installed 12volt pump, no need to hook up in pits, can be run in the lanes) 0 passes since freshened. New SFI flexplate stamped (JAN 2024). Rear mounted transmission cooler with fan. Neal Chance 9” Bolt Together Converter 3 passes since new.
MSD 7al-3 ignition, MSD HVC Pro Power coil, Autometer gauges/Tach, Biondo 450 delay box with practice tree bulb add on box, Biondo Air Throttle Stop/CO2 Tank. B&M Shifter with electric shift solenoid. Front mount Ron’s 1.5 gallon surge tank feed by 5 gallon rear fuel cell and Magnafuel Prostar 500 pump, Safecraft 5lb fire protection system.
S&W back half ladder bar kit, S&W ford 9” braced housing, 4.29 pro gears, (Strange aluminum center section, 35 spline axles, rear double adjustable coil overs), Wilwood rear brakes, Denny’s Aluminum Driveshaft, QA-1 front double adjustable shocks, Strange front brakes, Stroud 430 parachute. Center line 14” Convo pros with M/T 14-32 slicks, Centerline 3.5 Convo Pros with 27.5” ET Fronts. Also include Another set of rear 14” Convo Pros and another set of 3.5” Convo Pros with 25” ET Fronts.
Turn Key $30,000. Will need Seat Belts and window net. I would replace the Jesel belt, Lifters (Spare set of morel rebuilt included) and Valve Springs (New Set PAC included).
Also available 2017 Eagle 24’ V Nose trailer with Driver escape door, Generator box, door and slide out tray, L shape cabinets with work bench, 1 upper cabinet, air compressor. Towed less than 500 miles $10,000.
Bloomsburg, PA 570-784-4545